[language-switcher]

How to Maintain and Clean a Micropipette for Long-Term Performance

How to Maintain and Clean a Micropipette for Long-Term Performance
How to Maintain and Clean a Micropipette for Long-Term Performance

A micropipette is the quiet hero of your bench. It works all day. It asks for nothing. Then one morning, your replicates won’t match, and you blame everything but the pipette.

At AHN Biotechnologie, we believe a little care goes a long way. And with the AHN myPette® Pro Pipette, that care gets a lot easier. Let’s walk through it.

Is Your Micropipette Trying to Tell You Something?

Before we talk about cleaning, let’s talk about symptoms. Your micropipette gives warnings long before it fails.

Watch for these signs:

  • A plunger that feels sticky or gritty
  • A tiny drip hanging from the tip
  • Volumes that drift between runs
  • Tips that don’t seal snugly
  • A plunge that suddenly needs more force

See one? Don’t wait. Small issues grow fast, and bad pipetting quietly ruins good science.

Micropipette Warning Signs Infographic

The 60-Second Daily Habit

You don’t need a big routine. You need a consistent one. Wipe it down. Use a lint-free cloth and 70% ethanol on the body and grip. Do it at the end of every session.

Keep it upright. Store your micropipette on a stand. Never rest it on its side with liquid in the tip. Liquid creeping into the shaft is the number one cause of contamination.

Go slow. Release the plunger gently after aspiration. Fast release sends liquid where it doesn’t belong.

Stay in range. Never force the dial beyond the stated volume range. That’s how pistons and seals wear out early. That’s it. One minute. Big payoff.

The Deep Clean: Monthly, or After Any Spill

Some days, things go wrong. A tip pops off. Liquid gets up the shaft. Now what?

Stop pipetting immediately. Then follow your user guide to open the lower assembly. Check the shaft, the piston, and the seals. Clean what’s dirty. Replace what’s worn. Let everything dry fully before you put it back together.

Busy lab? Make this a monthly calendar reminder. Prevention is cheaper than re-running a week of experiments.

Autoclave Without the Stress

Here’s where your choice of micropipette really matters. Many pipettes make decontamination a gamble. The AHN myPette® Pro Pipette doesn’t. It is fully autoclavable and UV-resistant. Even better, it doesn’t need re-verification or recalibration afterwards. The tip cones are made of thermostable, non-reactive PVDF, so they handle tough cleaning cycles with ease. That means less downtime. Less guesswork. More time at the bench.

Don’t Skip Calibration

Cleaning keeps your micropipette healthy. Calibration keeps it honest. Every AHN myPette® Pro Pipette is calibrated in line with ISO 8655-6. Over time, even the best tool drifts, so schedule regular checks based on how heavily you use it. Heavy daily user? Check more often.

Here’s a bonus. Calibration is simple on the AHN myPette® Pro Pipette. Remove the top knob, and you only need one key. Many competing pipettes need two.

Built So Maintenance Feels Easy

A well-maintained micropipette starts with a well-designed one. Here’s what makes the AHN myPette® Pro Pipette easier to live with:

  • Magnet-assisted piston: A clear first and second stop, with one of the lowest plunging forces in its class
  • Silicone shock-absorbing tip ejection: Gentle on your thumb, and gentle on the mechanism
  • Large 4-digit display: Placed below the finger rest, so your palm never covers it
  • One-handed volume lock: Set it and trust it
  • Colour-coded knobs: Spot the right pipette in seconds
  • Universal tip compatibility: Choose the tips your workflow needs

You’ll find single-channel, 8-channel and 12-channel models, from 0.1 µL up to 10 mL. Multichannel versions even include spring-loaded tip cones with O-rings and a 360-degree rotating manifold.

Because it’s designed to reduce strain, it’s friendlier on your hands, too. That matters when you pipette for hours.

Final Thoughts

A micropipette doesn’t need much. A daily wipe, a smart deep clean and regular calibration will keep it accurate for years.

Start with a tool that makes all of that easier. The AHN myPette® Pro Pipette brings ergonomic comfort, ISO 8655-6 calibration and autoclavable durability together in one reliable package.

Ready to upgrade your bench? Explore the full range at AHN Biotechnologie and see the difference for yourself.

FAQs

1. Does autoclaving affect the calibration of a micropipette?

It can with many models. With the AHN myPette® Pro Pipette, it doesn’t. It is fully autoclavable and doesn’t need recalibration afterwards.

2. How often should a micropipette be calibrated under ISO 8655?

There’s no single answer. It depends on usage, risk and your quality system. Regulated labs and heavy daily users should check more often than occasional users.

3. What should I do if liquid enters the pipette shaft?

Stop using the pipette immediately, disassemble it per the user manual, clean and autoclave approved parts, inspect or replace seals, dry completely, and verify performance before returning it to service 

4. Can the wrong tips damage micropipette performance?

Yes. Poorly fitting tips cause leaks and inconsistent volumes. The  AHN myPette® Pro Pipette’s universal tip compatibility lets you pair it with quality tips that seal properly.

Recent Blogs

Webpage Inquiry Form